Get a Quote

Tell us what you're building. Get a ballpark today, a firm quote after a quick survey.

HOW IT WORKS

 Send the form / photos → ballpark range same day.

2. Site survey if it's not simple ($149, credited toward your job).

3. One firm quote — gear + labor, one invoice.

TWO WAYS TO BUY THE GEAR

 You buy it — "Buy it here" links to the exact models we install. You pay the store, it ships to you, Pin1 installs it. (Store links coming soon.)

We supply it — one invoice, Pin1 brings everything, at the supplied-by-Pin1 prices below. Ordered when your deposit lands, so nothing sits on a shelf.

GEAR WE INSTALL

Pin1 supplied prices; best 2 per category

NETWORK SWITCHES

UniFi USW-Lite-8-PoE — 8-port managed PoE — $169

UniFi Switch Pro 24 PoE — 24-port PoE, 400W — $875

WIRELESS ACCESS POINTS

UniFi U6 Pro — Wi-Fi 6 ceiling AP — $199

EnGenius EWS850-FIT — outdoor Wi-Fi 6 AP, IP67 — $435

ROUTERS / FIREWALLS

UniFi Dream Machine Pro (UDM-Pro) — gateway + controller + NVR bay — $475

UniFi Cloud Gateway Max (UCG-Max) — compact gateway for small sites — $349

STRUCTURED CABLING

Cat6 bulk cable, 1,000 ft box (CMR riser) — $259/box

Cable Matters 24-port Cat6 patch panel — $65

Cabling is normally quoted inside the per-drop labor price, not sold by the box.

RACKS & POWER

Wall-mount rack, 12U — $315

APC Smart-UPS SMT1500C, 1500VA — $849

VOIP PHONES

Yealink SIP-T54W — $199

Yealink SIP-T43U — $149

POS PERIPHERALS

Epson OmniLink TM-T88VII receipt printer — $499

Zebra DS2208 2D scanner (USB kit) — $175

IP CAMERAS / NVR

UniFi G5 Bullet (2K PoE) — $159

UniFi G5 Pro (4K PoE, 3x zoom) — $375

 INSTALL BALLPARKS (labor only)

Network drop, per run (Cat6, jack, plate, patch-panel termination, test): Starting at $199 per drop (typical $250-$350; volume brings it down)

Wireless AP install + config: Starting at $350 per AP when the drop already exists; $499 with a new drop

Switch install + config (rack, patch, VLANs, label): Starting at $249 per switch

Rack build-out (mount rack, gear, patch panel, UPS, dress cables): Starting at $599

POS station install (terminal, printer, scanner, drawer, test transaction): Starting at $299 per station

IP camera install (mount, aim, focus, configure recording): Starting at $175 per camera (cable run extra if no drop exists)

VoIP phone deployment: $49 per phone (5-phone minimum) or $299 system setup for small installs

Half-day tech rate (4 hrs on site): $549

Full-day tech rate (8 hrs on site): $999

SITE SURVEY

Phone / photo pre-quote — Free. 15-min call + text or email photos of the space and the network closet. Ballpark range the same day.

On-site survey — standard: $149. Site up to ~5,000 sq ft inside San Diego metro: walk-through, drop/AP/camera count, photos, closet check, written scope + itemized quote within 2 business days.

On-site survey — large / multi-floor: $299. Bigger footprints, warehouses, multi-suite, or after-hours access.

Credit rule: The survey fee is credited 100% toward the install if you proceed with a job of $1,000 or more within 30 days of the quote. On jobs under $1,000, 50% of the fee is credited. If you don't proceed, you keep the written scope and quote — the fee bought you a plan you can hand to anyone. Travel beyond ~25 miles of San Diego metro: add a trip charge, quoted up front.

 PRO PICKS — HARD-TO-FIND GEAR

1. Long-range point-to-point wireless bridge — links two buildings without trenching cable. Ubiquiti NanoBeam 5AC Gen2 — $169 each supplied (a link needs two); aiming, mounting, and config included as one job.

2. 60 GHz short-range bridge — gigabit across a parking lot or street. MikroTik Wireless Wire Cube Pro class — ask for it in your quote.

3. Industrial DIN-rail switch — for control cabinets, gate controllers, plant floors. Planet IGS-801T 8-port gigabit — supplied per job.

4. Industrial unmanaged switch — Moxa EDS-205A 5-port — supplied per job, priced at quote time.

5. Gigabit fiber media converters (pair) — extend a run past copper's 100 m limit. 10Gtek pair — sold as part of the long-run drop price.

6. SFP / SFP+ modules, vendor-compatible — the small part that unblocks a big switch. 10Gtek / FS-compatible — we keep a few on the truck.

7. CCTV/IP-camera tester — the tester we use on site. Triplett 8150 CamView IP Pro 5 — $253.60.

8. Cable + network qualification tester — proves a drop will run 10G. Fluke Networks LinkIQ — $2,956.71.

9. Outdoor AP, commercial grade — EnGenius EWS850-FIT — $435 supplied.

10. License-plate / specialty AI camera — UniFi AI LPR — $499 supplied, mounts bundled into the quote.

11. Legacy POS scanner (the exact replacement) — Zebra DS2208 USB kit — $175; we keep one spare for same-day register rescues.

12. Legacy POS receipt printer (the exact replacement) — Epson TM-T88VII — $499 supplied.

13. Rackmount PoE midspan injector — adds PoE without replacing the switch. 24-port gigabit, PoE Texas class — ask in your quote.

14. Ethernet surge protectors (outdoor runs) — UniFi Ethernet Surge Protector (ETH-SP) — small stock, added to every outdoor camera/AP job.

15. Odd couplers & adapters — RJ45 female-to-female couplers and the small parts that can kill an install day. Dingsun RJ45 coupler 2-pack — $12.

Ballpark only — final quote after site survey or photos. Prices on this page are starting-point estimates based on typical San Diego-area jobs. Your final quote depends on ceiling and wall access, cable distances, existing equipment, and site conditions, and is confirmed in writing before any work begins. Equipment prices change with the market and are confirmed at the time of your quote. No work is billed until you approve the final quote.